Nakanishi Sheenus neo, Руководство по эксплуатации

Страница: 9 / 18

23
5. ATTACHMENT OF THE TOOL
5 - 1 Attachment of One-Piece Tools ⑯ , Tip Holders ⑮ and M4 Screw Joint Adapter ⑰
Attach the Tip Holders
⑮
or the M4 Screw Joint Adapter
⑰
to the Handpiece
②
and clamp tightly using two provided
wrenches. (Fig. 9).
Then reattach the Protector Sleeve
⑬
.
Fig. 9
5 - 2 Attachment of Tip tools (e.g. ceramic grind stone tip)
Insert the grind stone tip to the Tip Holder ⑮ and tighten
the screw using the provided Allen Wrench (2.5mm). If the
clearance between the groove of the Tip Holders
⑮ and the
tool is too large, do not use excess force to tighten. Use a
thin metal shim. Reattach the Protector Sleeve
⑬
.
Fig. 10
5 - 3 M4 Screw Joint Adapter
Attach the M4 Screw Joint Adaptor
⑰
to the Handpiece
②
and clamp tightly using the two provided wrenches. Then
attach the M4 One-piece tool and clamp using the provided
wrenches, then reattach the Protector Sleeve
⑬
.
Caution on attaching the tool
If the tool or the Tip Holder ⑮ is loose, oscillation will be weak and cause noise or overheating.
Tighten
Tighten
Allen Wrench (2.5mm)
Set Screw
Tool