Nakanishi Sheenus neo, Руководство по эксплуатации

Страница: 16 / 18

30
Problem Item to be checked Possible cause Countermeasure
Abnormal noise or
sudden heat rise is
generated. ON LED or RESET
LED lights up. The Tip Holder ⑮ is used with
UNCLAMP mode ( ).
Change the setting to CLAMP
mode (
).
The tip holder does not match
with the length of the tool. Adjust the tool length.
Not vibrate when
using the Foot
Switch
③ .
ON LED not light up
GREEN.
The plug of Foot Switch is not
connected properly. Connect the plug of Foot Switch
properly.
The plug of Handpiece is not
c o n n e c t e d p r o p e r l y t o t h e
R e c e p t a c l e f o r C o n n e c t i n g
Handpiece
⑩ .
Re-connect the plug of
Handpiece correctly.
The Foot Switch
③
is defective.
Return to a NAKANISHI dealer
for service.
The output cord is broken.
The ultrasonic oscillator or the
Control Unit
① is broken.
ON LED or the
RESET LED lights
up. The ultrasonic oscillator or the
Control Unit
① is defective.