18
19
naish.com
OPERATING THE TORQUE 2 ATB AND 5-LINE TRIM CLEAT
To depower the kite:
1) Pull the trim line towards your body to depower the kite.
2) Lock the trim line back in the trim cleat at the
desired position.
To increase power to the kite:
1) Pull slightly on the trim line to release it from the trim cleat.
2) Slowly let the trim line feed through the trim
cleat to increase power.
3) Lock the trim line back into the trim cleat at the
desired position.
SENSE CONTROL SYSTEM
TORQUE 2 CONTROL SYSTEM
KITE LEASH
ATTACHING THE KITE LEASH
All Naish Control Systems are delivered with a kite leash.
When activating the SnapLock Quick Release (page 15) in an emergency situation, the kite leash will
keep the rider attached to the kite while the kite depowers.
1
2
Connect the snap shackle on the kite leash to the
leash attachment loop.
Push the quick release handle up and over the arm.
Connect the kite leash quick release to your
harness. Push the quick release handle up to
open the kite leash loop then put the kite leash
loop around the handle pass loop on the back of
your harness.
WARNING: Check to make sure the kite leash handle is securely in position before launching your kite.
5
Insert the arm of the quick release mechanism
into the kite leash loop.
4
Secure the quick release handle into position.
3
