7
naish.com
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
DEFLATING THE WING
A) Loosen the SureLock Valve by turning cap counter clockwise to the open position.
B) To release air from the leading edge and struts, push button in and turn approximately 90 degrees
so it is in the “IN” position.
USING THE PADDLE HOLDER
It is possible to take a paddle with you when going wingsurfi ng in order to be able to come back to
shore if the wind dies. To do so, lay your paddle onto the center strut and connect it to the handles
using the three Velcro straps attached to the handles.
A
B
REMOVING THE Y-HANDLES
A) Slide the neoprene cover back on one end of the Y-handle to expose velcro.
B) Open velcro
C) Slide open end through the Y-handle loop on the leading edge
D) Slide neoprene cover towards the open side
E) Open velcro
F) Slide open end through the Y-handle loop on the strut
A
D
B
E
C
F
