Page | 31
OUTLEN
– Length in milliseconds for the extension effect. Choose zero (0) to have the effect match the length of
the file.
New in R4
BLADESHADE
– Defines the amount of variance in the blade color that is allowed when the saber starts,
or when a new color-set is selected. Higher values allow more variance; lower values allow less. Recommended is
8-16 for slight variance on the blade color.
5.5.4.
CLASH
The clash tab contains the color settings for the clash color, along with specific settings for the clash effect. See
for details on how to set a specific color, as setting the main blade and clash are the same.
Figure 23 - Clash tab contains settings for the clash color and clash effects
C1FLSHC, C2FLSHC, C3FLSHC –
color parameters for the clash colors. Use these together to set the clash color.
CLSHEFFECT
– Defines the clash effect for the blade. Use the simulator to get an idea of how the effect will look in
the saber.
USE ALTERNATING CLASH (ACLSH)
–When enabled, the clash will vary between the clash color and blade color
for a more dramatic effect.
