5
A
Ab
bo
ou
utt y
yo
ou
urr P
PL
L--P
P
You are about to experience music
as never before with the Nagra PL-
P preamplifier.
The PL-P is designed and hand-
built entirely in Switzerland by
Nagra engineers, using
components of the highest quality
from around the world.
• It uses 8 high-grade vacuum
tubes and Nagra-made
transformers to provide a variety
of operating options.
• The power supply of the PL-P is
designed to deliver quiet and
stable performance suitable for
the highest resolution audio
system. It is completely isolated
from AC line noises.
• The PL-P accepts a variety of
input sources, including low-
output moving-coil and moving-
magnet phono cartridges, up to
three line-level sources such as
tuners, compact disk players and
video tape recorders, as well as
a fully integrated tape/signal
processor loop.
•
A traditional Nagra high-
precision modulometer provides
a facility to accurately monitor,
match and balance input and
output levels as well as to
optimize individual component
performance.
• The outputs of the PL-P are
directly coupled to the output
vacuum tubes for the highest
audio performance. There are
two sets of connectors to allow
bi-amp setups.
• The PL-P case is CNC-
machined in hardened, anodized
aluminium. It is designed to
provide many years of service
and to comply with all existing
electrical safety and
electromagnetic emission
standards.
This manual describes the
proper setup and use of the PL-
P. Please read through the
manual carefully before
attempting to set up and use the
PL-P. Mishandling and abuse of
the PL-P leading to faulty
operation
is not
covered under warranty.
About your PL-P
