16
8. Line/Mute/Phones
Switch
This is a 3-position switch. The
functions are as follows:
• In the upper position, output is
directed to the “LINE” output
connectors on the right side-
panel.
• In the middle position, output is
muted for both “LINE” and
“PHONES” connectors.
• In the lower position, output is
directed to the “PHONES”
connector for use with
headphones.
9. Headphone
Connector
This is a
1
/
4
” stereo jack connector.
The level is controlled using the
output potentiometer. The normal
audio outputs of the PL-P are
muted when headphones are
connected.
Right Panel/Output Layout
The right panel consists of two sets
of stereo output connectors:
• Two sets of output connectors
are available to feed power
amplifiers for bi-amping
applications.
• One set of input connectors and
one set of output connectors are
provided for connection to an
analog tape recorder or an
external analog signal
processor.
The level of the output
connectors can be individually
adjusted to match the level of
other input sources such as
phono, tuners, compact disk
players or video tape recorders.
Before connecting to the power
amplifier, ensure that the PL-P and
the power amplifier are powered
off. Insert the corresponding
connectors into either one or both
sets of the output connectors.
Configuration guidance for the tape
loop output level is covered in the
Advanced Operations portion of
this manual, under the “Output
Customization, Tape Loop Level
Adjustment” section.