NAGRA – CLASSIC INT
35
OPERATION OF YOUR CLASSIC INT
__________________________________________________________
Proceed only if you have completed the installation steps as
described in the previous chapter INSTALLATION OF YOUR CLASSIC
INT.
Power On
To use your integrated amplifier, you must push the mains switch
to position
1
(
ON
) first. The mains switch is located on the rear
panel (please see page 31).
The typical Nagra main selector has 4 positions :
OFF : similar to STANDBY. The unit is
still powered but the consumption
remains very low.
R : is for Remote Control use.
MUTE : the unit is turned on but the
signal is muted. No sound.
ON : the unit is playing normally.
This table sums up the different positions vs. actions.
Mains switch
Main selector
Action
0
Any
The unit is switched off
I
OFF
The unit is in standby
I
R
The unit can be triggered on
and off remotely
I
MUTE
The unit is on and muted (for
warming up for instance)
I
ON
The unit is playing
Содержание CLASSIC INT
Страница 2: ...NAGRA CLASSIC INT 2 ...
Страница 68: ...NAGRA CLASSIC INT 68 Nicht im Restmüll entsorgen ...
