13
Nagra -
CLASSIC DAC
IR Remote Control Unit
The Remote Control Unit, with batteries installed, should not be
exposed to excessive heat such as sunshine, fire or the like.
The CLASSIC DAC currently comes with the RCU-III IR Remote Control Unit with
Philips RC-5 format encoding.
Input selection
N/A
(+1 in the input list)
Mute
Input selection
(-1 in the input list)
Direct input selection
Operation LED
(will blink when a key
is pressed)
Opening screw to
access the battery
drawer
Power ON - OFF
(only with device front rotary selector turned on the R position)
Direct input selection
A USB
C S/PDIF 1
E N-LINK 1
B AES
D S/PDIF 2
F N-LINK 2
There is no direct selection key to the OPTICAL input. Use «+» key to select it.
Input selection with «-» and «+» keys
Press on «-» key to select one input before the current selection in the input list.
Press on «+» key to select one input after the current selection in the input list.
Power ON - OFF key
Toggle key to switch ON and OFF the CLASSIC DAC. When switching ON, the
CLASSIC DAC automatically select the last input active before the last power OFF and
its condition (input muted or not muted).
Note: Only operative when the front rotary selector is turned on the R position!
Battery installation/exchange
Open the battery drawer by removing the screw located on the back side of the Remote
Control Unit with a small Phillips drive screwdriver.
Replace empty batteries with either 2x new AAA-Dry cell battery or 2x AAA-NiMH/NiCd
rechargeable battery externally loaded.
By ensuring battery is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health. The recycling of materials
will help to conserve natural resources. For more detailed information about
recycling of battery, please contact your local authority, your household waste
disposal service or the shop where you purchased the battery.
