39 |
P a g e
control and press OK button to set the present date and time.
DAY LIGHT SAVING
Select DAYLIGHT SAVING using the mouse and the control button on the remote control and
select the appropriate daylight saving time zone.
If choosing EU or OTHERS, set the applicable conditions.
The options are:
OFF
: Daylight saving is turned off.
USA
: Applies the USA daylight saving time.
EU
: Applies the EU daylight saving time.
- Select the GMT AREA using the control button.
- Set the time difference with the standard time using the control button.
OTHERS
: If the time zone is neither USA nor EU, set the start and end date of the daylight
saving period.
-
Select BEGIN or END using the control button and press the SEL button.
-
Select the item using the control button, select the setting value using the
control button and press the ESC button to return to SET DATE & TIME setup
menu.
CAUTION:
- Do not set the start time to 23:00 for DLS.
- DLS can’t be applied if the date of BEGIN and END is the same.
CLIENT ACCESS
Enable/Disable remote access through network client software.
NTP
NTP is an abbreviation for Network Time Protocol, which is for synchronizing the time of the
computer systems over variable-latency data networks.
PRIMARY SNTP SERVER
: Input the address of the primary NTP time server.
SECONDARY SNTP SERVER
: Input the address of the secondary NTP time server.
TIME ZONE
: Greenwich Mean Time (GMT) is a term originally referring to mean solar time at
the Royal Observatory, Greenwich, London. Because NTP synchronizes with Greenwich Mean
Time (GMT) regardless of geography, users must set their own time difference.
CONNECTON MODE
: Select NTP time server connection mode.
INTERVAL
: Synchronize the clock by hours which is set on the connection period menu.
