SOURCE SELECTION
There are three Sources that VISO 1 AP can select. These are
1
AirPlay/iOS/iPod nano device*
2
Bluetooth device
3
Optical (S/PDIF) source
VISO 1 AP will output the audio from any of the above sources upon
successful detection or connection.
AIRPLAY
AirPlay lets you stream music from your AirPlay-enabled device to the VISO
1 AP. The AirPlay-enabled device and the VISO 1 AP must be in the same
network to send and receive streaming audio with AirPlay. This connection
could be wired, using Ethernet, or wireless.
•
After your AirPlay-enabled device and VISO 1 AP are connected to the
same network, the Airplay source will detect the VISO 1 AP. Select the
AirPlay icon (
) that appears in the application display and select
the unique ID of your VISO 1 AP (
NAD VISO1_DF601A
in the example
below).
•
Audio from
iTunes
running from your MAC or PC can also be streamed
using AirPlay as long as they are connected to the same network.
iOS/iPod NANO DEVICE*
You can directly playback your iOS/iPod nano device with VISO 1 AP if you
prefer not to use AirPlay.
1
Using applicable Apple USB connector, connect your iOS/iPod nano
device to the USB input of VISO 1 AP.
2
Toggle “
S
” until it turns to green light – AirPlay/iOS/iPod nano device
mode. If AirPlay is disconnected or unavailable, the VISO 1 AP will
automatically playback the source. If AirPlay is available, select “Dock
connector” (if applicable) to playback the connected source.
In some cases, you may need to toggle or cycle through “
S
” to activate
AirPlay mode or iOS/iPod nano device mode.
* Refer to the section below about
iOS/iPod SUPPORTED BY VISO 1 AP
for a list of compatible devices.
BLUETOOTH DEVICE
Bluetooth creates wireless connection between compatible devices by
being paired together.
1
Ensure that your Bluetooth device is active or turned ON.
2
Pair or connect your Bluetooth device with the unique device ID of
your VISO 1 AP which is listed as the product name (VISO1 AP) together
with the last six characters of your unit’s MAC (Machine Access Control)
address (example: VISO1 AP DF8036).
^
3
Toggle “
S
” until it turns to blue light – Bluetooth device mode. Start
playback of your Bluetooth device upon connection.
VISO 1 AP OPERATION
9
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
