iPod SETUP
The iPod Setup menu allows you to preset the following associated
settings when iPod is the selected source.
Enabled:
Select “Yes” to enable iPod as a Source or “No” to disable it.
Auto Connect:
Select “Yes” to automatically enable and connect the
iPod player docked in the linked NAD iPod docking station when Source
5 (the default iPod source allocation in the T 187) is selected. Select “No”
if you do not want a docked iPod to be automatically connected.
Menu Timeout:
Set the time for the OSD to revert to the “Now
Playing” display when the iPod menu has been left idle (no scrolling or
navigation being done) for the specified time out time. For the “Now
Playing” OSD to be shown, there should be a song paused or being
played before going to the iPod menu. You can set the “Menu Timeout”
between the range 5s to 60s at 5s increments. If you do not want for
the menu to timeout, select “0ff”.
SPEAKER SETUP
After connecting all ancillary sources and other combinations, the Speaker
Setup menu will guide you on how to manage and setup your speakers in
order to achieve optimum sound acoustics in your listening environment.
The following are the Speaker Setup Menu sections.
IMPORTANT NOTICE
The T 187 is an AV Surround Sound Preamplifier and therefore has
no speakers. The mention of “Speaker(s)” in this manual refers to the
speakers of your external amplifier as interfaced with the T 187.
AUDYSSEY AUTO CALIBRATION
It has been shown that many, if not most, surround sound systems are not
accurately setup and calibrated. To be done properly, calibration requires
special knowledge and instrumentation that the average person probably
doesn’t possess.
The Audyssey Auto Setup and Calibration featured in T 187 uses a
microphone, along with sophisticated digital electronics built into your
T 187, to automatically setup and calibrate the T 187 to the exact speakers
and speaker placement of your own unique Home Theatre.
The following measurements are performed:
t %FUFDUJPO
Speaker configuration is detected including number of
surround speakers and whether a subwoofer and center channel is
connected.
t 4J[F
T 187 crossover is set based on each channel’s signal handling
capability and the subwoofer crossover is automatically set.
t -FWFM
SPL of each speaker is matched within 1dB at the microphone
position.
t %JTUBODF
is accurately set to within 1 foot (30 centimeters) of the
microphone for each speaker position.
t 1PMBSJUZ
the setup program will detect and notify the user if any
speakers are connected improperly. Incorrect polarity can ruin the
illusion of realism offered by surround sound.
This is a one-time set up, unless speakers are moved or changed, in which
case the calibration should be performed again.
OPERATION
USING THE T 187 – SETUP MENU
18
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
Р
У
С
СКИЙ
