CHECK FOR UPGRADE
Automatically search for latest upgrade software available for your M50.
Install upgrade software when available.
SEND SUPPORT REQUEST
Make a service request by sending your name, phone number, email
address and the subject of your request. A NAD customer service agent will
contact you either by email or phone call.
IMPORTANT!
“Send support request” is the best tool for any service request, customer
query or troubleshooting tips. Use this option to get direct assistance
from a NAD customer service agent.
DIAGNOSTICS
Display signal strength of current connection, IP address and applicable
details for your M50. Select “Advanced diagnostics” to show a log report of
your M50 and record of current connectivity and indexing status.
FORCE HOTSPOT MODE
Disconnect your M50 from your wireless network connection and reset it
to the factory Hotspot settings. This is normally initiated if you are changing
your network connection settings or connecting your M50 to a new
network.
REBOOT
Initiate reboot of your M50 to restore normal operations when experiencing
any inadvertent malfunctions.
RIP/ENCODE CONTROL PANEL
The M50 transport can rip directly a loaded CD to a connected M52 Digital
Music Vault or USB mass storage device. Using NAD’s own music management
software, ripping is completely automatic. With a network connection to
the Internet, this music management software fetches metadata and cover
art, without the need for a computer! Everything is organized and instantly
available for playback. You can browse your music collection using album art or
category listing and easily create playlists on the fly.
IMPORTANT!
“Rip/Encode Control Panel” will manifest in the “Configure Player” menu
window only if there is a USB mass storage device or a M52 connected
to M50’s rear panel USB 2 input . In the absence of such interconnection,
the “Rip/Encode Control Panel” option will not be available in the
“Configure Player” menu.
The following Rip/Encode Control Panel options allow you to setup and
monitor the music CDs being backed up.
ENCODER SETTING
Set up the default file format when ripping your music CDs.
FLAC (default format):
High quality compression designed specifically
for CD backup purposes. Files are ripped at FLAC level 5 balancing
compression and rip speed at full CD lossless levels of 44.1 kHz/16bits.
MP3:
Standard audio compression designed to keep bandwidth low
with little degradation. Files are ripped at 320kbps, the highest level of
sound quality available to MP3 format.
Both:
For Hi-fidelity quality playback with the ability to export or
download to a personal MP3 Player.
Select “Update” to save your selected encoder setting.
RIP/PLAY OPTIONS
Set default setting when an audio disc is inserted.
Always Rip:
Loaded audio disc will be directly ripped to the connected
M52 or USB mass storage device.
Always Play CD:
Playback loaded audio CD. If loaded disc contains
music files, select
(Source) and
(Audio Disc) to browse content
of loaded disc. Select file to playback.
Prompt for Rip or Play:
A Player notification will pop-up giving the
user two choices - Rip or Play the loaded disc.
OPERATION
15
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ