IMPORTANT NOTES ABOUT POWER SAVE SETTINGS
•
If D 7050 is switched to standby mode with POWER SAVE set to ON, the
D 7050 will go to Demo Mode. At this condition, the D 7050 cannot
be switched back to operating mode using the D 7050 app. Press
(Standby) switch or ON from the remote control to switch D 7050 to
operating mode.
•
Keep POWER SAVE setting to OFF for continuous control of D 7050
using the D 7050 app.
COMPARATIVE TABLE OF AUTO SHUTOFF AND POWER SAVE SETTINGS
General conditions:
•
Unit has no active source and no user interface interaction.
•
Unit at operating mode.
TIME
SETTINGS ON D 7050 APP
RESULT
AUTO
SHUTOFF
POWER
SAVE
Condition 1
After 30 minutes
ON
OFF
Unit goes to standby mode.
Condition 2
After 30 minutes
OFF
OFF
Operating mode.
Condition 3
After 30 minutes
ON
ON
Unit goes to standby
mode. Refer to IMPORTANT
NOTES ABOUT POWER SAVE
SETTINGS.
Condition 4
After 30 minutes
OFF
ON
Operating mode.
Refer to IMPORTANT NOTES
ABOUT POWER SAVE
SETTINGS.
REMOTE
9
Go to Menu window.
10
Select Source.
11
Temporarily mute audio output or restore audio from mute mode.
12
Switch D 7050 to standby mode or operating mode.
13
Swipe from right to left or left to right to select Source.
14
Slide to the right to increase volume level.
Slide to the left to decrease volume level.
SPEAKER EQ
15
Select “PSB Imagine Mini” or “PSB Imagine T” speakers if either is hooked
up with your D 7050.
Select “None” if the speaker type hooked up with your D 7050 is neither
PSB Imagine Mini nor PSB Imagine T.
IDENTIFICATION OF CONTROLS
11
9
10
12
10
14
13
15
8
ENGLISH
POR
TUGUÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
