ABOUT THE ON-SCREEN DISPLAY (OSD)
The C 717 employs a self-explanatory on-screen display “menu” that will
appear on the connected video monitor/TV. These are required during
the setup process (and are useful in day-to-day operation), so be sure to
connect the monitor/TV before proceeding with setup.
diSplaYing the Setup menu oSd
While in DVD mode, press the C 717’s [SETUP] button momentarily for the
DVD’s Setup Menu OSD to appear. With the use of the SR 9’s navigation
buttons, you may select various menus. If the Setup Menu does not appear,
check your applicable video connections.
navigating the Setup menu oSd and making changeS
To navigate through the Setup Menu OSD options, please do the following
using the SR 9 remote control:
1
Press [
] keys to move up or down the menu selections.
2
Release [
] key to stop at a particular menu item.
3
Use [
] keys to select through the options of a particular menu.
4
Press [ENTER] to select a desired option and at the same time move on
to the next menu item.
5
Press [SETUP] or [ ] to exit the Setup menu.
NOTE
The SETUP menu OSD is accessible only at DVD mode.
diSplaY diSc oSd
You can display the general disc playback status on the TV screen. Some
items can be changed using the menu. To use the on-screen display:
1
Press the SR 9’s [DISPLAY] during playback.
2
Press [
] to select an item. The selected item is highlighted.
3
Key-in the desired the number button or press [ENTER] as applicable.
NOTES
• The display feature may not be available for all disc media and is media
dependent.
• Display disc OSD does not apply to audio discs with MP3/WMA/JPEG
files as they are already presented in their respective menu screens.
• The front panel and SR 9’s [DISPLAY] button toggles between title/
chapter/time and audio/subtitle/angle display configurations.
• If no button is pressed for about 30 seconds, the on-screen display
disappears.
SELECTING SOURCES
You can choose your desired source by rotating the [SCROLL/PUSH/ENTER]
knob to select through the following:
Internal DVD Internal FM tuner Internal AM tuner TV VCR
then back to Internal DVD.
The same source can be directly selected using the SR 9 remote control.
Directly select a Source device - [DVD], [TUNER], [VCR] and [TV]. Toggle the
SR 9 [TUNER] button to switch between AM and FM mode.
When you change sources, the VFD will show the selected source in its
upper line display.
ADJUSTING THE VOLUME
In addition to the Volume knob, use the SR 9’s [VOLUME
] to adjust
the volume level of the C 717 raising or lowering the channels altogether. A
momentary keypress will change the master volume by 1 dB increments. If
you hold down [VOLUME
], the volume change will “run-on” until the
key is released.
Since recordings vary considerably in overall average level, there is no
imperative to listen at any particular volume setting. A setting of “VOLUME 20”
may sound “as loud” from one CD or DVD as “VOLUME 10” does from another.
The C 717 will power-up from Standby mode at whatever volume setting
it was last used; however, if the prior setting was greater than “VOLUME
40”, the C 717 will power up at “VOLUME 25”. This prevents inadvertently
beginning a session at excessive volume.
muting the Sound
Use the SR 9’s [MUTE] key to silence all channels completely. “MUTE” is
shown flashing in the VFD. Muting is always available regardless of the
source or listening mode selections.
NOTE
Adjusting the volume via the SR 9 or the front-panel knob automatically
releases the mute function.
SETUP
Setting up the c 717
1
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й
