background image

CONDITION

POSSIBLE CAUSES

POSSIBLE SOLUTIONS

No power.

The power cord is disconnected.

Plug the power cord into the wall outlet 
securely.

The power is ON, but the C 565BEE does 
not work.

No disc is inserted.

Insert a disc. 

The C 565BEE does not start playback.

The disc is loaded upside down.

Reload the disc with the label side UP.

The disc is too dirty.

Clean the disc.

No sound.

The equipment connected with the audio 
cable is not set to receive CD signal output.

Select the correct input mode of the audio 
receiver so you can listen to the sound from 
the C 565BEE.

The power of the equipment connected with 
the audio cable is turned off.

Turn on the equipment connected with the 
audio cable.

Sound skips.

The C 565BEE is subject to vibration or physical 
shock from external sources.

Change the installation location.

VFD shows “UNLOCKED” at Optical Input 
mode.

No source component is connected at the rear 
panel OPTICAL DIGITAL AUDIO IN port or the 
connected source is not supplying a signal.

Connect source component at OPTICAL 
DIGITAL IN port.

Ensure that the connected source is 
supplying compatible audio signal via 
C 565BEE’s OPTICAL DIGITAL IN. 

The C 565BEE cannot be switched to 
standby mode.

A mono plug is plugged-in at the +12V 
TRIGGER IN port of the rear panel.

Unplug the mono plug.

The remote control does not work properly.

The remote control is not pointed at the 
remote sensor on the CD player.

Point the remote control at the remote 
sensor of the CD player.

The remote control is too far from the CD 
player.

Operate the remote control closer to the 
CD player.

The remote control batteries are dead.

Replace the remote control batteries.

REFERENCE

TROUBLESHOOTING

NOTES ON DISCS

HANDLING DISCS

Do not touch the playback side of the disc. Hold the disc by the edges so that 
fingerprints do not get on the surface. Never stick paper or tape on the disc.

STORING DISCS

After playing, store the disc in its case. Do not expose the disc to direct 
sunlight or sources of heat and never leave it in a parked car exposed to 
direct sunlight.

CLEANING DISCS

Fingerprints and dust on the disc can cause poor picture quality and sound 
distortion. Before playing, clean the disc with a clean cloth. Wipe the disc 
from the center out. 

Do not use strong solvents such as alcohol, benzine, thinner, commercially 
available cleaners, or anti-static spray intended for older vinyl records.

14

ENGLISH

FR

ANÇ

AIS

ESP
AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ

Содержание C565BEE





















Отзывы: