NAD C 538, Руководство пользователя

Страница: 4 / 12

ENGLISH
4
WHAT’S IN THE BOX
Packed with your C 538 you will find
•
Audio cable connector
•
Detachable power cord
•
CD 8 remote control with 2 (two) AAA batteries
•
Quick Setup Guide
SAVE THE PACKAGING
Please save the box and all the packaging in which your C 538 arrived.
Should you move or otherwise need to transport your C 538, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
25 feet/8 meters, between the C 538’s front panel and your primary
listening/viewing position. This will ensure reliable infrared remote control
communications. The C 538 generates a modest amount of heat, but
nothing that should trouble adjacent components. It is perfectly possible
to stack the C 538 on top of other components.
NOTE ON INSTALLATION
IMPORTANT!
Install the C 538 Compact Disc player on a level, vibration-free surface.
Severe vibration or operation in a tilted position may cause the player
to not track correctly. The player may be stacked with other stereo
components, if there is adequate ventilation around it. If the C 538 is placed
near a radio tuner (AM or FM), a VCR or a television set, the operation of
its digital circuits may produce static that would interfere with reception
of weak broadcast signals. If this occurs, move the C 538 away from other
devices or switch it off when viewing or listening to broadcasts.
QUICK START
In case you simply cannot wait to experience the performance of your
new C 538, the following “Quick Start” instructions is provided to get you
underway.
Please make all the connections to your C 538 with the unit unplugged. It is
also advisable to power-down or unplug all associated components while
making or breaking any signal or AC power connections.
PLAY A CD
1
Connect compatible connectors from DIGITAL AUDIO OUT and LINE
OUT ports of C 538 to corresponding audio input sources on your
amplifier.
2
Ensure that the supplied power cord’s female connector end is firmly
secured to C 538’s AC Mains input socket and the male plug connected
to the mains power source.
3 Press the front panel Standby button to turn ON the player.
4
Press [OPEN/CLOSE] to open the disc drawer.
5 Place a CD, label side up, in the tray’s circular recess. Be certain that the
disc is centered within the recess.
6 Press [PLAY/PAUSE]. The drawer closes automatically, and the disc
begins to play.
•
At any time you may press [
9
SKIP
0
] to select different tracks
on the disc.
•
Press [PLAY/PAUSE] if you want to stop play temporarily while
keeping the pickup at its current position on the disc.
•
Press [PLAY/PAUSE] again when you want to resume playback.
• Press [STOP] if you want to end play and reset the pickup to the
beginning of the disc.
INTRODUCTION
GETTING STARTED