background image

MDC CLASSIC UPGRADE SLOT

The delivery format of digital content is constantly changing in pure 
digital systems like the C 390DD. Each of these formats typically requires 
specialized hardware and software, often with licensed IP and content copy 
protection.

In order to address such continuous technological evolution, NAD’s 
design team placed all digital interface circuitry of the C 390DD on easily 
upgradable modules. NAD calls this the Modular Design Construction 
(MDC). The C 390DD includes one MDC module already – the DD USB 1 
(Direct Digital USB) which has Type A and Type B USB input terminals.

There are two optional MDC modules – the DD HDMI 1 and the DD 
AP 1 modules. Remove covers to install the optional Modular Design 
Construction (MDC) modules. Consult with your NAD dealer on how to 
procure the DD HDMI 1 and the DD AP 1 modules and their consequent 
installations to the C 390DD.

DD HDMI 1 (DIRECT DIGITAL HDMI)

The DD HDMI 1 offers three HDMI input terminals and one HDMI output 
with video pass through. With DD HDMI 1 installed, the C 390DD can be 
the heart of a “Video 2.0” system using the mandatory 2 channel linear 
PCM soundtrack from Blu-ray or DVD to make a compelling high definition 
theater presentation. DD HDMI 1 is fully 3D video compatible but without 
surround sound decoding or video processing.

A  HDMI OUT:

 Connect the HDMI Monitor OUT 

to a HDTV or projector with HDMI input.

B  HDMI 1 -3:

 Connect the sets of HDMI input 

to the HDMI OUT connectors of source 
components such as DVD player, BD player or 
HDTV satellite/cable box.

WARNING

 

Before connecting and disconnecting any HDMI cables, both the 
C 390DD and the ancillary source must be powered OFF and unplugged 
from the AC outlet. Failure to observe this practice may cause permanent 
damage to all equipment connected via HDMI sockets.

DD AP 1 (DIRECT DIGITAL ANALOG-PHONO)

DD AP 1 uses high quality Analog-to-Digital conversion to make analog 
sources compatible with C 390DD’s pure digital circuitry. The PHONO circuit 
has impedance settings for MM and MC with gain automatically set. 

The DD AP 1 consists of the line level input terminals – PHONO, SINGLE-
ENDED (ANALOG) and BALANCED.

A PHONO:

 Input for either a Moving Coil 

or Moving Magnet phono cartridge. 
Connect the twin RCA lead from your 
turntable to this input.

B  SE IN (SINGLE-ENDED):

 Use a twin 

RCA-to-RCA lead to connect these 
sockets to the left and right analog 
output of a CD player, preamplifier or 
processor.

C  PHONO GROUND CONNECTOR: 

Turntables normally includes a single 
wire earth lead. Use the C 390DD 
phono ground connector to connect this lead. Unscrew the 
terminal to expose the hole that will accept the lead. After insertion, 
tighten the terminal to secure the lead.

D BALANCED:

 Connect XLR audio source to these connectors. Ensure 

that proper pin configurations are followed – Pin 1: Ground, Pin 2: 
Positive (signal live) and Pin 3: Negative (signal return).

IDENTIFICATION OF CONTROLS

REAR PANEL

A

B

C

D

A

B

9

ENGLISH

FR

ANÇ

AIS

ESP

AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ

Содержание C 390DD

























Отзывы: