background image

-

you leave the equipment unattended,

-

before adjustment,

-

before checking, cleaning or repairing the device,

-

after being hit by a foreign object,

-

before cleaning the outlet,

-

if abnormal vibrations occur.

.

.

Preparation

 

Always wear sturdy shoes and long pants when near the robot, and do not operate the device with bare feet or sandals.

 

Carefully check the area where the machine will be operated and remove all stones, branches, wires, bones and other foreign objects.

 

In tall grass, you may not notice obstacles (e.g. stumps, roots), so before starting work with the device, mark all 
obstacles hidden in the grass that cannot be removed.

 

Before use, always check the blades, screws, and knife assembly for wear or damage. Replace worn or damaged knives and screws in 
pairs to keep them balanced.

 

Be careful with multi-knife implements as the rotation of one knife may cause the other knives to rotate.

.

.

Replacing the knives

 

In order to provide the lawn mowing robot with optimal working conditions, the blade of the machine should be sharpened. To this end, the condition of the knives 

should be checked and, if necessary, replaced.

 

It is safe to have the knives replaced by an Authorized NAC Service Center. This is a paid service.

 

Before replacing the blades in the robot, turn off, remove the battery and unscrew the blades.

.

.

Use

 

To avoid unintentional contact with the robot, mow only in daylight or under good artificial lighting.

 

Do not use the robot in the rain, especially in a thunderstorm. Avoid mowing wet grass.

 

Make sure your feet are firmly on the slope when operating the robot.

 

Come on, never run. Remember to keep a firm, safe position.

 

Be especially careful around the robot when changing the direction of travel.

 

Do not turn on or use the robot on excessively sloping slopes.

 

Switch off the machine when it is tilted or when moving it over non-grassy surfaces and when transporting it to 
and from the mowing area.

 

Remove the battery before transporting the lawnmower.

 

Do not use the machine with damaged covers or housings and without a safety device such as attached covers and / or 
grass catchers.

 

Start the device according to the instructions, making sure that your feet are away from the knives.

 

Do not start the lawn mower when it is tilted.

 

Keep hands and feet away from rotating parts.

ATTENTION

: The charger for the device should be used indoors, in a roofed place or protected against 

weather conditions. Despite the use of a construction that is safe by design, the use of measures

safety measures and additional protective measures, there is always a residual risk of injury.

SAFETY AND RESPONSIBILITY OF THE MANUFACTURER

Any use of the robot inconsistent with the description contained in this manual is considered improper and the manufacturer is not responsible for 
any damage or damages resulting from such conduct.

Correct use also includes respecting the operating, maintenance, storage and repair conditions established by the 
manufacturer. In order to prevent accidents, all rules of safe use and avoidance of hazards must be followed.

Any changes to the structure of the device introduced by the user may affect the safe use of the machine and release 
the manufacturer from liability for any damage or injuries.

RESIDUAL RISK

Although the manufacturer is responsible for the design of the device to eliminate the danger, some risks during operation 
are unavoidable. Residual risk results from incorrect behavior of the operator of the device.

The greatest danger occurs when performing the following prohibited activities:

 

use of the device by children,

8

Содержание RLM1500G2-NG

























Отзывы: