Nac Hi-Moiton II, Быстрое руководство

Страница: 59 / 71

59
No. Name Direction Function & In/Out Level Note
1 VD IN IN
Input for External Sync signal
3.3VCMOS / Low active
2 VD IN RET GND Return
3 VD OUT OUT
Output of Frame Sync signal
3.3VCMOS / Low active
4 VD OUT RET GND Return
5 TRIG IN IN Make contact or 3.3VCMOS / Falling edge
6 TRIG IN RET GND Return
・
Connector : HR10G-7R-6S(73) (HIROSE)
・
Applicable Plug : HR10A-7R-6P(73) or HR10A-7R-6PC(73) (HIROSE)
7 AUX Connector
The complex connector controls RETURN and TALLY signals.
・
RET 1 IN : Display RETURN video selected by
“
RET 1
”
on VF
・
RET 2 IN : Display RETURN video selected by
“
RET 2
”
on VF
・
G TALLY OUT : Show status of G TALLY
・
R TALLY OUT : Show status of R TALLY
No. Name Direction Function & In/Out Level Note
1 RET 1 IN Open Drain
2 RET 2 IN Open Drain
3 G TALLY OUT Open Drain
4 R TALLY OUT Open Drain
5 N.C
6 N.C
7 N.C
8 N.C
9 GND GND
10 GND GND
・
Connector : HR10G-10R-10S(71) (HIROSE)
・
Applicable Plug : HR10A-10R-10P(73) or HR10A-10R-10PC(73) (HIROSE) OUT
8-9 DC IN 1, 2 Connector
+12V Input connector for Camera Head. Power can be supplied to the Camera Head via DC IN 1, DC IN 2 or
AC/DC Power Supply inside the Camera Head through optical fiber cable. When power is supplied by all the
connectors, the Camera Head is run by the highest voltage input.
No. Name Direction Function & In/Out Level Note
L +12V IN +11V to +16V
DC IN 1, DC 2 IN and internal
AC/DC power unit output are
connected by ORing.
N +12V RET GND Return
FG N.C
・
Connector : NAC3MPA-1 (NEUTRIK)
・
Applicable Plug : NAC3FCA (NEUTRIK)
・
Input voltage : DC+11V to DC+17V
10-11 MIC 1, 2 Connector
Connect an external microphone. Audio signal input into the connector is output from MIC OUT on the rear of
CCU and also is embedded in HD-SDI signal when selected with the CCU menu (LIVE audio is embedded).
No. Name Direction Function & In/Out Level Note
1 SHIELD Phantom power : DC 48V Return
2 MIC (HOT) IN
600 ohm balance in.
AB power
: DC 12V
Phantom power : DC 48V