Nac Hi-Moiton II, Быстрое руководство

Страница: 52 / 71

52
ENGINEER MENU (1/2)

CAMERA HEAD FORMAT
FORMAT SELECT
1080I59, 720P59, 1080P59, 1080I50, 720P50, 1080P50
Changes Image Output Format of the Camera. The Format has to be
identical with CCU Format when Camera is connected to CCU.

SENSOR MAINTENANCE

Specify Sensor BIAS settings
BIAS SET
DEFAULT, USER
Usually set to DEFAULT. Set to USER when you change R/G/Bch gain or
offset value as the following chart shows.
USER SET
COLOR TEMP 3200K, 5600K, 6300K, 7500K
SENSITIVITY -3dB, 0dB, +3dB, +6dB
R AMPLITUDE
0.00 - 4.20
R SETUP
G AMPLITUDE
G SETUP
B AMPLITUDE
B SETUP
Changes R/G/Bch gain and offset value at selected COLOR TEMP,
SENSITIVITY. If these values are changed, the system memorizes this value
even the camera is turned off.
DEFAULT ALL
YES, NO
The above settings become DEFAULT
＝
Factory Set.

SYSTEM MAINTENANCE
DOT
NOISE CANCEL
DOT NOISE CANCEL ON, OFF
LEVEL 0 - 1023
Normally CANCEL ON and set LEVEL as 256.
LIVE IMAGE
FLICKER AVERAGE OFF, ON
Flicker Correction in Live view. DEFAULT is ON.
PLAY IMAGE
FLICKER CORRECTION OFF, ON
Flicker Correction in Play view.
GAIN 1 - 10
Specifies intensity of Flicker Correction. Larger value gives more effect in
reducing flicker and noise but also in increasing motion blur.
THRESH 1 - 10
Specifies threshold of Flicker Correction. Smaller value gives more effect in
reducing motion blur but in increasing flicker and noise. This parameter
should be changed for fine-adjustment with higher value of GAIN. When
GAIN value is small, this does not affect images remarkably.
3D CONTROL MASTER, SLAVE