Nabrico DF-356-UFW Скачать руководство пользователя страница 25

25

NABRICO DF-356 Upfit Winch with FASST Winder

TM

 Owner’s Manual

OM-DF356FST-001-A

PRODUCT WARRANTY

 

NABRICO warrants that all NABRICO products shall be free from defects in material and 

workmanship during the Warranty Period (as herein defined); provided, however that NABRICO’s warranty 

hereunder shall not apply to any equipment, material, or component that is not manufactured by NABRICO, 

and NABRICO makes no expressed or implied warranty that any such equipment, material, or component is 

free from manufacturer or supplier defects. To the extent permitted, NABRICO agrees to transfer and assign 

to a Buyer or End User any warranties extended by the manufacturer or supplier of such equipment, material 

or components. NABRICO shall have no obligation or responsibility to repair or replace any defective 

NABRICO product if a notice of defect is not reported in writing to NABRICO within 180 days from the date 

of shipment of any NABRICO Winch Products and 90 days from the date of shipment of any other NABRICO 

Products (such 180 day and 90 day periods are hereinafter referred to as “Warranty Period”).

 

In the event Buyer or End User timely notifies NABRICO in writing of any claim of defect covered 

by this warranty, NABRICO shall correct the nonconforming work by making repairs or replacements, at 

NABRICO’s option and at NABRICO’s expense, if NABRICO’s examination shall disclose to its satisfaction 

that all or a portion of the NABRICO Product is defective. However, this warranty is conditional upon 

compliance by the Buyer or End User with the loading, use, and handling in accordance with good 

commercial practices of the trade, and NABRICO shall not be responsible for defects caused by misloading, 

overheating, improper cleaning, misapplication, physical abuse or from normal wear and tear. This warranty 

is void where any NABRICO Product has been altered or repaired by anyone other than NABRICO or its 

authorized agent.

 

THE WARRANTY AND REMEDIES SET FORTH HEREIN ARE IN SUBSTITUTION OF AND IN 

LIEU OF ANY AND ALL OTHER WARRANTIES AND REMEDIES EXPRESSED OR IMPLIED, INCLUDING, 

BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE, WITH RESPECT TO THE CONSTRUCTION, DELIVERY AND SALE OF A 

NABRICO PRODUCT, AND NABRICO SHALL, FOLLOWING SAID DELIVERY AND SALE, IN NO EVENT 

BE LIABLE TO BUYER OR ANY END USER FOR THE BREACH OF ANY WARRANTY, GUARANTEE, OR 

REMEDY, EXPRESSED OR IMPLIED, IN FACT OR IN LAW, EXCEPT AS SPECIFICALLY SET FORTH 

ABOVE. EXCEPT AS PROVIDED HEREIN, NABRICO SHALL AT NO TIME AND IN NO EVENT BE LIABLE 

TO BUYER OR ANY END USER OR TO ANYONE CLAIMING TO, UNDER OR THROUGH BUYER OR 

ANY END USER FOR LOSS OR DAMAGE OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, ANY ACT, 

ERROR, OMISSION, NEGLIGENCE, STRICT LIABILITY, TORT, PRODUCT LIABILITY, OR OTHERWISE OF 

NABRICO, ITS EMPLOYEES OR SUBCONTRACTORS.

PRODUCT NOTICES

Proprietary Information.

  The information and sketches shown in this owner’s manual are proprietary to 

NABRICO. Duplication, reproduction, or manufacture from data contained herein is strictly prohibited. 

Usage Warnings.

  All NABRICO Products must be correctly sized, properly located, and installed to serve 

their intended functions and it is the responsibility of Buyer or End User to insure such action is taken. 

Please note and consider the following warnings:  Improper installation can result in failure of a NABRICO 

Product. NABRICO Products that have failed because of overloads, or which have been dislodged from 

foundations, or have fractures and/or deformations should be repaired or replaced immediately. Loads to 

bitts must be applied to the posts between the base and the midpoint in a horizontal or downward direction. 

Properly placed chocks will prevent line chafing. Kevels should be installed horizontally on foundation bases 

of sufficient size, and forces to kevels must be direct to the trunk and not the horns. Horns will fail when 

exposed to direct loads. And, NABRICO Products are not designed for use to lift a vessel. 

Dimensions.

  All dimensions shown in this catalog are in feet and inches. Weights are in English pounds. 

Capacities are in short tons of 2,000 pounds. Please note that dimensions and weights are nominal and are 

subject to standard variations. Maximum test pressure on hatches, doors, and enclosures is 2 PSI unless 

advised in writing by NABRICO of a higher allowance. Product details and specifications are subject to 

change without notice.

Содержание DF-356-UFW





























Отзывы: