Nabrico DF-356-UFW, Руководство пользователя

Страница: 15 / 28

15
NABRICO DF-356 Upfit Winch with FASST Winder
TM
Owner’s Manual
OM-DF356FST-001-A
3.1 EQUIPMENT INSPECTION
NOTICE
An inspection program should be started as soon as any equipment is put into service. A qualified
person should be appointed the responsibility of regularly inspecting the equipment. Written records
of inspections are recommended by the manufacturer.
3.1.1 Frequent Inspection
3.1.1.1 Visually inspect the equipment before each use. Check the equipment for cracks, bending,
wear, rust, corrosion and any other damage. If any problems are discovered, stop use
immediately and remove the equipment from service until all appropriate repairs are
completely performed.
3.1.1.2 ENSURE THAT EQUIPMENT IS PROPERLY LUBRICATED.
3.1.1.3 Check to ensure that the foundation is in good condition. Make sure that mounting fasteners
and other hardware are tightened securely.
3.1.1.4
Ensure that the wire rope is installed correctly and anchored securely to the drum. Also,
check to make sure the wire rope is in good condition.
3.1.2 Periodic Inspection
3.1.2.1
Periodic inspections should occur whenever equipment is returned to service from storage,
every six months in service, more frequently if an inspection discovers any damage or poor
operation, or in any case where the winch may have been over loaded or operationally
abused.
3.1.2.2 Visually inspect the equipment checking the finish for wear, flaking or other damage as listed
in the frequent inspection plan. Disassembly is recommended in order to properly inspect
individual components.
3.1.2.3
Check the winch drum by moving it with your hands. Check for excessive movement that
may be the result of worn or loose gears, bearings or shafts. Some play is normal while
excessive play may be the result of overloading.