Nabrico DF-356-UFW, Руководство пользователя

Страница: 10 / 28

10
NABRICO DF-356 Upfit Winch with FASST Winder
TM
Owner’s Manual
OM-DF356FST-001-A
2.1 OPERATING THE WINCH
The DF-356 Upfit Winch with FASST Winder
TM
is operated by using either the hand wheel or FASST
Winder
TM
System. The winch is also equipped with a disc braking system, locking dog and anti-backlash
friction band. The following operating instructions will help you become familiar with these basic operating
components of the winch. These instructions are not a substitute for proper training by your company in the
safe use of winches, barge rigging and other marine equipment.
2.1.1 Handwheel Operation
2.1.1.1 Normally the winch is shipped with the handwheel mounted to the winch. If the handwheel
is not installed, upon receiving the winch, attach the handwheel to the handwheel hub using
the 4 bolts and lock washers that are included. Refer to the parts breakdown drawings
located in the appendix for location of the winch components.
2.1.1.2
After installing the handwheel, use it to turn the winch drum in either a clockwise or counter-
clockwise motion. The drum rotation, which is the same as the handwheel rotation, will spool
wire rope onto or off the bottom of the winch drum. If the winch drum will not rotate freely
refer to operation instructions for the brake and dog systems to ensure that nothing is locked
down.
WARNING
Do not use the handwheel as a brake or anchor for a load.
2.1.1.3 Prior to tightening the winch, engage the locking pawl per instructions 2.1.3.1.
2.1.1.4
The handwheel assembly is equipped with a speed handle that can be used for faster
operation.
2.1.1.5 When operating the winch, always maintain tension on the wire rope to keep it tightly and
evenly wound on the winch drum.
NOTICE
Breaking-in the winch occurs during the first 10 hours of normal operation. During break-in, mating
surfaces become polished and clearances increase. This is desired for efficient operation of the
bearings and gears.