Nabrico DF-1 N Series страница 39 Скачать руководство пользователя

Страница: 39 / 72

NABRICO DF-1 N ELECTRIC WINCH Owner’s Manual

OM-DF1-021-A

5. Notes concerning warranty and liability

All units are supplied according to the terms described in

our standard “Conditions of Sale.” The unit limited war-

ranty is also deﬁ ned in our “Conditions of Sale” and is

located in the back of our product catalogs as well as the

back of your order invoice.

All NORD Safety Notes and all related NORD Operating

instructions shall be considered up-to-date at the time in

which they were compiled by the buyer, machine builder,

installer or user. NORD reserves the right to incorporate

technical modiﬁ cations and information updates to any

safety/operating instructions that are within the scope

of providing additional knowledge or clariﬁ cation, com-

municating design changes, or product enhancements.

Information updates may include any NORD product, or

subsequent products purchased and supplied by NORD;

No speciﬁ c claims can be derived from the information or

illustrations and descriptions contained in the safety notes

or related operating instructions.

WARNING

NORD assumes no liability for personal injury, equipment

damage or malfunctions resulting from failure to

comply with any installation safety notes. The appli-

cable national, regional, and local work regulations

and safety requirements must also be complied with.

Failure to comply with any safety notes or regulations

may result in serious injury, damage to property, or even

death.

6. Checklist for installation and operation



Verify that the purchased NORD product has been

supplied with the expected accessories & options. Check

the received goods and packing slip to make sure items

are properly received.



Make sure that you have all of the required Operating

Instructions for your NORD electric motor, gearmotor,

reducer, electromechanical brake, mechanical variable

speed drives, or electrical variable frequency drives.



Consult NORD if you feel you are missing any

documentation or if you have questions.

DRIVESYSTEMS

GENERAL INSTRUCTIONS

RETAIN FOR FUTURE USE

U10000 - 2 of 2

www.nord.com/docs

08.08.12

NORD Gear Corporation

Toll Free in the United States: 888.314.6673

NORD Gear Limited

Toll Free in Canada: 800.668.4378

Содержание DF-1 N Series









































































Результаты поиска

Содержание DF-1 N Series

Отзывы:

Похожие инструкции для DF-1 N Series

Бренды по названию

Популярные бренды

Nabrico DF-1 N Series, Руководство пользователя

Результаты поиска

Содержание DF-1 N Series

Отзывы:

Похожие инструкции для DF-1 N Series

Бренды по названию

Популярные бренды