NABO GSI 1210, Инструкция по эксплуатации

Страница: 65 / 107

.
2 9
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
CONTROL
ERROR
DESCRIPTION
ERROR
CODE
• Make sure the water
input tap is totally open and that
there is no water cut.
•
•
Close the water input tap,
separate the water input hose
from the tap and clean the filter at
the connection end of the hose.
Restart your machine,
contact the service if the error
resumes
Close the tap.
•
Contact the service.
•
•
Water discharge hose is clogged.
• The filters of your machine
might be clogged.
•
Power off-on your machine
and activate the program cancellation
command.
•
If the
error continues,
contact the service.
• Contact the service.
• Power off your machine
and close the tap.
• Contact
the service.Faulty electronic card
Inadequate
water supply
Error of continuous
water input
The waste water in the machine cannot be discharged. The waste water in the machine cannot be discharged. The waste water in the machine cannot be discharged.
The waste water in the
machine cannot be discharged.
ntended water temperature could not be reached faulty heater and heater sensor ntended water temperature could not be reached faulty heater and heater sensor
I
ntended water temperature
could not be reached
faulty heater and heater
sensor
Alarm is active
against water overflow
W a sh
End
Start/
Pause