English
- 7 -
5.
Sources
You can manage your input source preferences using
the options of this menu. To change the current source
highlight one of the options and press
OK
.
5.1.
Source Settings
You can access the source settings menu directly using
this option. Edit the names, enable or disable selected
source options. There are also
Regular
and
Enhanced
options available for HDMI sources.
Regular
and
Enhanced
options are affecting the colour settings of
the selected HDMI source.
Inserting the Batteries into the Remote
Remove the screw that secures the battery compart-
ment cover on the back side of the remote control
first, if the cover is screwed on previously. Insert two
size
AAA
batteries. Make sure the (+) and (-) signs
match (observe correct polarity). Do not mix old and
new batteries. Replace only with same or equivalent
type. Place the cover back on. Then secure the cover
again with the screw.
Note that when the batteries are low, the performance
of the remote control may be impaired and the LED
indicator on the remote may not illuminate when a
button is pressed.
A message will be displayed on the screen when the
batteries are low and must be replaced.
Batteries should not be exposed to excessive heat
such as sunshine, fire or the like.
Power Connection
IMPORTANT
: The TV set is designed to operate on a
220-240V AC, 50 Hz
supply. After unpacking, allow the
TV set to reach the ambient room temperature before
you connect the set to the mains.
Plug one end (the two-hole plug) of the supplied
detachable power cord into the power cord inlet on
the rear side of the TV as shown above. Then plug
the other end of the power cord into the mains socket
outlet.
Note:
The position of the power cord inlet may differ depending
on the model.
Antenna Connection
Connect the aerial or cable TV plug to the aerial input
(ANT) socket located on the left side of the TV or
satellite plug to the satellite input (LNB) socket located
on the rear side of the TV.
Rear side of the TV
1.
Satellite
Left side of the TV
2.
Aerial or cable
If you want to connect a device to the TV, make
sure that both the TV and the device are turned off
before making any connection. After the connection
is done, you can turn on the units and use them.
Licence Notification
The terms HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator,
Inc.
Dolby, Dolby Vision, Dolby Atmos, and the double-D
symbol are registered trademarks of Dolby Laboratories
Licensing Corporation. Manufactured under licence
from Dolby Laboratories. Confidential unpublished
works. Copyright © 2012-2022 Dolby Laboratories.
All rights reserved.
YouTube and the YouTube logo are trademarks of
Google Inc.
For DTS patents, see http://patents.dts.com.
Manufactured under licence from DTS Licensing
Limited. DTS, the Symbol, DTS and the Symbol
together, DTS-HD, and the DTS-HD logo are registered
trademarks or trademarks of DTS, Inc. in the United
States and/or other countries. © DTS, Inc. All Rights
Reserved.
