manualshive.com logo in svg

N-Tron 7506GX2 Series, Руководство пользователя и инструкция по установке

Поделиться
Скачать
N-Tron 7506GX2 Series Скачать руководство пользователя страница 20

(Revised 2011-07-21)                                                                                                                                                                                   

Page 20 of 158

 

 
the user the ability to have one or more ports share two or more VLAN groups.  For more information and 
examples on how this could be implemented, please see the ‗VLAN Configuration Examples‘ in this 
document, and/or our website‘s technical documents. Note that RSTP on overlapping VLANs is not 
supported and the system will automatically disable RSTP on all but the lowest VID VLANs that have 
overlapping ports. 
 

Rapid Spanning Tree Protocol 
 

The Rapid Spanning Tree Protocol as specified in IEEE 802.1D-2004 is supported. One Spanning Tree per 
non-overlapping VLAN is supported.  The Rapid Spanning Tree Protocol (RSTP) supersedes the Spanning 
Tree Protocol (STP) which was described in IEEE 802.1D-1998.  The RSTP is used to configure a simply 
connected  active  network  topology  from  the  arbitrarily  connected  bridges  of  a  bridged  network.    Bridges 
effectively connect just the LANs to which their forwarding ports are attached.  Ports that are in a blocking 
state do not forward frames.  The bridges in the network exchange sufficient information to automatically 
derive a spanning tree. 
 
RSTP allows for much quicker learning of network topology changes than the older STP.  RSTP supports 
new and improved features such as rapid transition to forwarding state.  RSTP also sends out new BPDUs 
every hello time instead of just relaying them. RSTP interoperates with older STP switches by falling back 
to the older STP when the older BPDUs are detected on bridge ports.  The user can also manually configure 
bridge ports to use the older STP when desired.   

 
SNMP Traps 
 

The 7506GX2 switch supports up to 5 SNMP Trap Stations to which SNMP Traps will be sent.  The switch 
supports  five  standard  traps;  Link  Up,  Link  Down,  Cold  Start,  Warm  Start  and  Authentication  Errors.  
SNMP  Traps  will  be  sent  to  all  the  trap  stations configured  on  the  switch  when  the  corresponding  trap  is 
enabled. 

 
IGMP Snooping 
 

IGMP Snooping is enabled by default, and the switch is 

Plug and Play

 

for IGMP.  IGMP snooping provides 

intelligent  network  support  for  multicast  applications.    In  particular,  unneeded  traffic  is  reduced.    IGMP 
Snooping  is  configured  via  the  web  console  and  if  enabled,  operates  dynamically  upon  each  power  up.  
Also,  there  can  be  manual  only  or  manual  and  dynamic  operation.    Note  that  ―static  multicast  group 
address‖ can be used whether IGMP Snooping is enabled or not. 

 

IGMP Snooping will function dynamically without user intervention.  If some of the devices in the LAN do 
not  understand  IGMP,  then  manual  settings  are  provided  to  accommodate  them.    The  Internet  Group 
Management Protocol (IGMP) is a protocol that provides a way for a computer to report its multicast group 
membership to adjacent ‗routers‘.  In this case N-Tron 7506GX2 switches provide 

router-like functionality

.  

Multicasting  allows  one  computer  to  send  content  to  multiple  other  computers  that  have  identified 
themselves  as  interested  in  receiving  the  originating  computer's  content.    Multicasting  can  be  used  to 
transmit only to an audience that has joined (and not left) a multicast group membership.  IGMP version 2 is 
formally  described  in  the  Internet  Engineering  Task  Force  (IETF)  Request  for  Comments  (RFC)  2236.   
IGMP version 1 is formally described in the Internet Engineering Task Force (IETF) Request for Comments 
(RFC) 1112. The 7506GX2 supports v1 and v2. 

 
 

Содержание 7506GX2 Series































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды