8
Fig. 2.4.1
2.4
Other hazards
The machine was designed and manufactured with all devices and equipment for ensuring the
health and safety of operators.
The machine is designed to reduce the risk of contact with moving
parts to the lowest level.
However, there is one remaining hazard:
As it has been already mentioned above, the working zone is protected as much as possible,
but it must remain partly open to insert the material subject to machining into the working
zone.
Therefore, it may happen that operators insert fingers into this zone, where there are the
cutting tool and workpiece holder.
Caution:
Always keep your hands away from the cutting zone as much as possible.
Caution:
Always follow safety rules contained in the manual and ensure that they are adhered to
and that all other remaining hazards are excluded.
