24
Caution:
While using compressed air for the purpose of cleaning, wear safety goggles and never
use pressure exceeding the value of 2 bars.
6.2. Oil filling in the gearbox
The machine is equipped with a gear box with a permanent grease filling. The gearbox is
maintenance-free.
6.3. Changing the Tools
Caution:
While changing the tools, use working gloves.
While changing the tools, follow these steps:
•
Dismantle the upper holder of the workpiece (position F, and four bolts - position E,
fig. 6.3.1).
•
Loosen the bolt of the lower support cylinder (position C and D, fig. 6.3.1) and lower
the bottom support to its lowest position.
•
Unscrew the nut of the tool (positions B and A, fig. 6.3.1) and remove the tool from
the shaft. If the tool cannot be removed from the shaft easily, use two M8 bolts, which
shall be screwed into threaded openings in the cutter, to remove it. Use the bolts to
push the tool from the bed.
•
Install the new cutting tool and tighten the nut (position B, fig. 6.3.1).
•
Re-install the upper holder of the workpiece (four bolts, positions F and E, fig. 6.3.1).
Fig. 6.3.1.
