N-Com SK Series, Руководство пользователя

Страница: 23 / 29

EN
23
N.B.: Some systems are not able to handle the activation / deactivation of the intercom connection. In
this case, operate from the B802 system.
N.B.:

Whilst using the UNIVERSAL INTERCOM, the B802 system maintains the connection to the MAIN
DEVICE only (and not to the SECOND MOBILE PHONE or to the SATELLITE NAVIGATOR).

The intercom system connected to N-Com B802 does not allow simultaneous connection to a
mobile phone. Only one system paired up in Universal Intercom mode can be stored.
15.3.
Universal Conference (chain intercom)
The “Universal Conference” mode can be used to connect in conference call N-Com systems of the
“800”/“900” series and one system paired up in Universal Intercom mode.
The connection procedure is outlined in the diagram provided here below:
1.
System A must have been paired up beforehand to two B systems (Universal Intercom pair up)
and C.
2.
System A has to initiate the first intercom connection with system B (Universal Intercom), by
pressing the relevant intercom connection command.
3.
At this point, system C can join the intercom conference call, establishing an intercom connection
with system A.
4.
The three systems are now in intercom conference call mode and can talk to each other at the
same time.
5. Should you wish to add another system (D), the latter must be paired up beforehand to system C.
Press the relevant connection command to start a 4-participant intercom conference call.