Meikon
MAMC-XLINK – Technical Reference Manual
6.5 Setup of the Serial Interfaces
6.5.1 I
2
C Interfaces
There are two I
2
C interfaces connected to the ATmega645 microcontroller’s port pins.
The 1
st
one connects port pins PE0 (Clk) and PE1 (Data) to a LM75 temperature sensor. The
address of this sensor is 0.
The 2
nd
I
2
C interface is connected to port pins PE4 (Clk) and PE5 (Data). This I
2
C interface is
routed to the IPMB interface of the AMC backplane.
IPMI firmware programs these two interfaces.
6.5.2 SPI Interface
The SPI interface is connected to port pins PB3 (SPIMISO), PB2 (SPIMOSI), and PB1
(SCLK). It is used for in-system-programming of the AVR ATmega645 microcontroller.