Multipoint Control Box 8
InstallatIon Manual
6
Wall Switch operating instructions:
to operate a zone, simply press the
button to turn the respective zone on or off.
the green lED beside the
button is illuminated to indicate the zone is on.
Full airflow should be available from ten seconds to two minutes after switching the zone
on, depending on the stroke time of damper motor being used.
In the event of a power loss and restore to the controller (ie. blackout), the controller will
resume operation with all zones in the on / off state last set by the user.
Basic Connection Diagram:
Spill Zones
&
Plug
Play
8
7
6
5
Zone Motors
4
3
2
1
Zone Motors
www.metalflex.com.au
MPCBT8
Touchpads
24VAC Supply
A N
Clock Option
Fujitsu Bridge
MOTOR OUTPUTS
MOTOR OUTPUTS
ON
1 2 3 4 5 6 7 8
EZ
Multipoint
EZ
Multipoint
Included
Transformer
GPO
Zone 4
Damper
Zone 3
Damper
Zone 2
Damper
Zone 1
Damper
Zone 8
Damper
Zone 7
Damper
Zone 6
Damper
Zone 5
Damper
