MYXfitness MYX II, Руководство по эксплуатации продукта

Страница: 8 / 23

8
Hardware Setup
MOVING THE BIKE
1
2
3 4
This product must be set up and operated
on a solid level surface. If your bike is not level, adjust
the four leveling feet located on the underside of the
front and rear legs (see figure 4) until all four feet are
evenly contacting the floor.
Use two people to move the product, since
it weighs over 150 lbs (68 kgs).
1. Have one person lift the rear stabilizer to tilt the
bike forward onto the transport wheels, while the
other person holds the handlebars.
2. Roll the bike forward to the new location.
3. Lower the rear stabilizer to the floor.
4. Unscrew leveling feet if needed to prevent rocking
on uneven floors.