MyWam Yeti, Руководство по эксплуатации и обслуживанию

Страница: 31 / 35

YETI Edition 7 / 2022-10-25
31 | P a g e
o
All worn parts and components that do not match or are unsuitable for the user should be replaced
with new ones.
o
The product prepared in this way can be put back into use.
19. Service and periodic inspections
For safe and trouble-free use of the stroller, it must be regularly and thoroughly inspected and serviced
as indicated in the table below.
In a situation where the stroller user is not able to carry out the activities himself, he should return the
stroller to a specialized stroller service point or directly to the Manufacturer, who will properly review and
will perform necessary service activities. These activities may be charged extra.
All repairs should be carried out in specialized, authorized Services (see point 23) or directly at the
Manufacturer.
Only original spare parts that are supplied or recommended by the Manufacturer may be used in the
stroller.
Service should be performed:

Each time before using the stroller
o
Check the efficiency of the central brake - After activating the central brake, both rear wheels of the
stroller should be locked and cannot rotate.
o
Check the attachment of structural elements - It is necessary to check all mechanisms of the stroller
and its movable elements, in particular, pay attention to: the correct mounting of the therapeutic seat
with the backrest to the stroller frame, the correct mounting of all four wheels, the correct functioning of
the five-point seat belts, properly locked seat angle adjustment mechanism, properly locked backrest
angle adjustment mechanism and footrest correct mounting.
o
Check the condition of the tires - Check that the tires on all four wheels are not damaged or worn.
o
Inspection of solid frame parts, seat with backrest and footrest frame - Visually inspect the condition
of the structural profiles. These elements must not be damaged or cracked.

Every one month
o
Cleaning the stroller - Clean any moving parts, bearings, adjustment mechanisms with a soft cloth and
then lubricate them with a few drops of light oil. Be careful not to soil the upholstery of the stroller or
your own clothes.
o
Check all bolted connections for looseness - Carefully check that all bolts and knobs in the stroller are
properly tightened.

Every six months
o
Check the cleanliness of the upholstery and inspect the general condition of the stroller - Do not allow
the stroller
to be neglected as described in the chapter „Cleaning and care”.
20. Disposal
Disposal and recycling: the used stroller should be returned to a recycling center in accordance with the
regulations in force in the given country.