MYTRIX Dreamweaver, Руководство пользователя

Страница: 30 / 56

Mytrix Technology - http://www.mytrixtech.com
2014 Mytrix Technology
All rights reserved Third Version
28
4.1 Coarse adjustment
First, set the four springs at the bottom to the shortest, then press the LCD rotate button,
choose ‘prepare-Auto home’.
Hold the platform, and then shut down the power, eyes look straight forward to the
platform, push the extruder manually, adjust the distance between the extruder and
platform from the front, back, left and right, the distance should be approximately about
1 piece of paper.
If the distance is far away, please loosen the regulation nut at the hot bed bottom. If it
is too close, please tighten it.
4.2 Fine adjustment
Choose a model and start to print, when it starts, please look straight forward to the
platform and make sure the distance between the nozzle and platform is about one piece
of paper.
If the filament is zigzag shape, it means the distance is far away, it drops off from the
nozzle, please loosen the regulation nut. If the filament is too thin, it means the nozzle
has stocked the platform, please tighten the regulation nut.
If you find the distance is far away or too close during printing, please stop printing.