07
06
KICKSPACE
®
500E ECO & 600E ECO
KICKSPACE
®
500E ECO & 600E ECO
5.0 Controls
(continued...)
6.0 Appendix
5.0 Controls
(continued...)
5.0
500E ECO
600E ECO
Low (l)
Boost (ll)
Low (l)
Boost (ll)
1000
2000
1500
3000
Heat Output (Watts)
Heating Performance Data
Output switch
Sound Levels
Model
Sound Pressures at 2.5m (dBA)
500E ECO
22.7
36.0
600E ECO
24.4
42.6
Low
High
Weight and Rated Power
Model
Model
Rated Power (W)
Unit Weight (kg)
500E ECO
2025
3.1
600E ECO
3040
3.6
Sound levels tested in accordance with EN 23741.
6.0
Comfort Periods
P1
Morning, Evening & Weekend
Weekday
07:00 - 09:00 & 17:00 - 23:00
Weekend
08:00 - 23:00
P2
Morning, Afternoon, Evening & Weekend
Weekday
07:00 - 09:00, 12:00 - 14:00 & 17:00 - 23:00
Weekend
08:00 - 23:00
P3
Day & weekend
Weekday
06:00 - 23:00
Weekend
08:00 - 00:00
P4
Evening & Weekend
Weekday
15:00 - 23:00
Weekend
08:00 - 00:00
P5
Morning & Evening
Weekday
06:00 - 08:00 & 21:00 - 23:00
Weekend
06:00 - 08:00 & 18:00 - 00:00
P6
Morning, Afternoon, Evening & Weekend
Weekday
06:00 - 08:00 & 14:00 - 21:00
Weekend
07:00 - 21:00
P7
7h - 19h (Office)
Weekday
07:00 - 19:00
Weekend
n/a
P8
8h - 19h Saturday
Weekday
08:00 - 19:00
Weekend
09:00 - 18:00 (Saturday only)
P9
Weekend only
Weekday
n/a
Weekend
08:00 - 00:00
Programme Mode
A quantity of 9 built-in (P1-P9) and 4 user defined (U1-U4) timed
programme options are available to choose from. Each day is
divided into 48 half hour periods operating in comfort mode.
Built-in Programme Selection
1. Select
P
by pressing
until
‘ProG’
is displayed.
2. Press
(OK)
twice and the programme number will begin
to blink.
3. Use
or
to select required programme (P1-P9).
4. Press
(OK)
to confirm the chosen programme.
User Programme Menu
1. Select
P
by pressing
until
‘ProG’
is displayed.
2. Press
(OK)
twice and the programme number will begin
to blink.
3. Use
or
to select a user defined programme (U1-U4).
4. Press and hold
(OK)
for 3 seconds to edit the programme.
5. The hour will now display, also note the segments on the
bottom of the display will begin to blink
- Press
to set this half hour as night set back
- Press
to set at comfort mode
- Note when pressing
or
you will automatically
move to the next half hour.
6. When you reach the final segment (23:30) press
(OK)
to move
to day 2 here you have the option to copy the same programme
that you have just created or create an alternative programme
a. To copy the programme press
(OK)
while YES is displayed
this can be copied to each day individually and it is
also possible to copy a number of days but then
change other days to an alternative programme by
selecting
NO
then pressing
(OK)
b. To create an alternative programme for individual days
use or to change
YES
to
NO
then press
(OK)
and repeat from step 6.
7. After completing the last day the word
SAVE
will appear,
press
(OK)
to save changes.
The thermostat will then automatically enter
AUTO
mode to
follow the selected programme.
Installer’s Set-up Parameters
To access the installation parameters menu, press and hold
(OK)
for 10 seconds. Use
or
to highlight the parameter to be
adjusted then press
(OK)
to toggle the parameter setting, when
the value starts to blink, use
or
to adjust the value. Then
press
(OK)
to confirm. Once parameters are set, go to
<End>
parameter and press
(OK)
to go back to the main menu.
Parameter
Name
Default Setting
Description
Alternative Setting
Manually pair the thermostat to the receiver
rF ini
Press (OK) to begin pairing
Myson Smart Start (Adaptive Start) Thermostat will learn
to achieve temperature by time requested
At
No
Yes
Window open detection, product will switch off if a large
temperature drop is detected (usually caused by an open
window / door)
oP
No
Yes
Room temperature limiter (limits the maximum room
temperature set point)
Lt
20°C< TR MAX <30°C
30°C
Press OK
Automatic daylight saving time adjustment
No - manual
Yes - automatic
n/a
n/a
Ch
Reverts the control back to factory settings
CL
Version number
UE
Exit the installation menu
End
Fan Only Mode
If required, the unit can be used in summer for air circulation
without heat.
• Set the fan only/off/heating switch to fan only (blue dot)
• Adjust fan speed to required setting
Note: This mode will by-pass the wireless programmable
thermostat and also breaks the pairing link therefore when
switching back to heating mode it may take up to 5 minutes for
the thermostat to automatically pair with the receiver.
Press and hold OK for 10 seconds to reset
EN
EN
