Myson BENCH, Инструкция по установке и техническому обслуживанию

Страница: 2 / 16

02
COLUMN .
MYSON COLUMN
radiator ' s
aesthetically sophisticated
d
esign
was conceived for
technologically
superior
heating. The
ir design form makes them suitable for a wide range
of architectural applications from retro to modern.
Contents/Warranty
03
04
05
06
07
08
12
Kontec
Basics
Myson, Inc. Limited Warranty
Myson, Inc warrants the following products against defects in material and workmanship to the original owner for the
duration listed from date of installation or three months after date of shipment, whichever comes first.
The remedy in all cases shall be to repair or replace the product at Myson’s discretion upon verification of a factory defect. If
replacement is required, and an exact replacement product is no longer available, Myson reserves the right to furnish a
similar product of equal value.
NO REMOVAL, SHIPPING OR INSTALLATION EXPENSES ARE REIMBURSIBLE
The original purchaser is responsible for determining the suitability of the Myson product for their installation. Installation
and troubleshooting should be performed by a competent technician with knowledge of hydronic heating and/or basic
electricity.
Damages occurring during shipment, transit, storage or handling, abuse, neglect, accident, misapplication, incorrect power
line voltage, mproper water source or connection, fire, flood or other Acts of God are not covered. Freight damage claims
MUST be made within 10 days of receipt from Myson. No Exceptions.
STEEL PANEL RADIATORS
--
SELECT, T6, DÉCOR, COLUMN AND BENCH
The duration of warranty for steel panel radiators is 5 Years.
•
Painted finishes will not peel or flake from the surface of the radiator
•
The body of the radiator and its welded joints will not leak when the product is properly installed and maintained
according to Myson's instructions.
What is not covered:
•
Rust occurring from improperly sealed threaded connections or oxygen corrosion
• Electrolytic corrosion caused by failure to flush the system properly after initial installation
Contents
What is covered:
Important information
Product description
Model overview / connection dimensions
Piping & rough-in
W all bracket position information
Optional Floor bracket information
Heating outputs / weights / water content
Piping arrangements
Valve selection
Heat output factors / System start - up
13
9
-
1 0
11