Myson 100G, Руководство по установке

Страница: 9 / 16

9
Step 1 Locate studs in wall where the radiator is to be mounted.
Step 2 Mount the brackets so the radiator is a minimum of 4 inches off the floor.
• Failure to allow 4” minimum clearance below radiator can significantly reduce
radiator performance.
• Attach brackets firmly to the studs using appropriate hardware making sure
the spring loaded connection on brackets is on top.
• All Select Radiators use 2 brackets except the 180G which uses 3 brackets.
• Use a level to assure bracket is plumb.
Step 3 To install the radiator on the brackets, set the top edge of the top grill into the upper
part of the bracket then gently lift and snap the bottom into the lower part of the bracket.
Step 4 Position radiator to line up with the supply and return pipes.
Many MYSON products are in excess of 70 pounds. Care should be taken to have help to lift
larger radiators into place to avoid lifting injuries.
Select Radiator Series
Conventional Wall Installation Using Optional EZ-Brackets