manualshive.com logo in svg

Myson 100G, Руководство по установке

Поделиться
Скачать
Myson 100G Скачать руководство пользователя страница 11

11

Select Radiator Series

Valve Installation

MYSON

11

Nylon shipping plugs are meant solely for keeping paint from radiator threads during the 
painting process. Failure to remove plastic plugs and insert the stainless metal plugs can 
result in significant property damage if heating system is run with plastic plugs in place.

Step 1

  Remove all plastic shipping plugs on the radiator.

Step 2

  Before proceeding clean tappings of any foreign material.

Step 3

  Install air vent plug.

Step 4

  Install blanking plugs.

 NOTE:

  See page (5) for alternate 

 

valve and plug locations.

Step 5

  Apply teflon tape or compound to the 

 

threaded nipple on the valve.

Step 6

  Thread the nipple of the valve into the radiator 

 

using a 7/16” or 12mm Allen wrench.

CAUTION:

  Do not over tighten and do not use a pipe wrench on ground joint.

Step 7

  Cut the copper pipe to a correct length.

NOTE:  

The pipe must fit all the way up to the stop in the valve body (approx. 1” into the valve body).

Step 8

  Place compression nut on copper pipe.

Step 9

  Place compression ring on copper pipe.

CAUTION:  DO NOT DAMAGE THE COMPRESSION RING.

Step 10

  Attach valve to valve nipple and tighten coupling. Turning valve body can damage compression 

ring.

CAUTION:  DO NOT

 rotate valve body. Turn compression nut only and 

DO NOT OVER TIGHTEN.

Step 11

  Tighten compression nut.

If glycol is to be added to the system for freezing protection, extra care must be taken to seal 
connections fully with teflon or pipe dope.

Содержание 100G

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды