Myson 100G, Руководство по установке

Страница: 4 / 16

4
INSPECT FOR DAMAGE
NOTE: Inspect materials for concealed shipping damage. You only have 11 days to file a
freight claim. If items are damaged or missing, please call Myson at 1-800-698-9690.
INSPECTION FOR COMPLETENESS
Unpack the Select Radiator carefully to avoid damage or loss of parts.
The Select Radiator should come with the following parts:
2 - Concrete wall brackets
1 - Stainless steel solid plug
1 - Stainless steel air vent plug
INTRODUCTION
The Myson Select Radiator will keep any room in comfort and style. We at Myson, Inc. thank you
for your purchase of the Select Radiator. Each radiator combines Myson’s compact design and
advanced steel construction with a durable baked epoxy/polyester enamel powder coat finish.
Myson’s sleek styling and thorough testing provides attractiveness and dependability. Myson’s
goal is to assure the highest performance, quality, reliability and outstanding customer service.
CAUTION
Step 1
Read this entire instruction manual thoroughly before beginning installation.
Step 2 To ensure full efficiency of your Myson Select Steel Panel Radiator, please follow all the
instructions carefully observing the caution notes for each step.
Step 3 Failure to follow these instructions will invalidate the manufacturer’s warranty.
APPLICATION
Myson radiators are only for use in recirculating closed loop hydronic heating systems. These
radiators are not recommended for gravity systems. Myson Select Radiators are designed to work
with a maximum working pressure of 78 PSI and no more then 212 degrees F water temperature.
DO NOT USE STEAM IN THESE RADIATORS.
DESIGN AND LAYOUT CONDITIONS
Myson Select Radiators should only be used with a recirculating pump closed loop hydronic
heating system. Please consult national and local codes for specific restrictions that may be
imposed on your installation. Position your radiator away from your circulator pump to avoid
either excess pressure that could force water out the air vent or excess suction that could draw
air into the system. The preferred positioning for the Select radiator is below a window where
it can minimize downdrafts from glazed areas.
Myson Radiators may be hot to the touch. Generally the surface temperature is at 10-12
degrees Fahrenheit below system water temperature. Care must be taken to consider room
occupant’s ability to sense or understand that radiators may be hot. Should radiator surface or
system water temperature be an issue, please contact MYSON at 1-800-698-9690 for information
on the MYSON LST radiators. LST (Low Surface Temperature) Radiators can be a viable solution
where temperatures are a safety concern.
Select Radiator Series
Before You Begin
MYSON