5
. MAINTENANCE
ATTENTION!
Maintenance service must be carried out by qualified technical personnel, in full compliance with the safety
standards required by the laws in force. Maintenance has to be carried out every six months.
In order to proceed to maintenance service, follow the below checks:
•
Turn the POWER OFF.
•
Check the good condition of any component.
•
Check screw connections are properly tightened.
•
Unlock the operator, and make sure the gate opens and closes freely. Clean the inox arm using a dry cloth (no
lubrication needed).
•
Put the gate to closing position, lock the operator and if necessary repeat the programming procedure.
RELEASE SYSTEM TEST:
•
In order to check the good operation of the release system put the gate to closing position and unlock to motor.
The unlock operation has to be smooth and eazy.
•
The gate has to move freely in both directions.
•
The release key has to turn smoothly and eazily.
6
. WARRANTY
PROTECO products are covered by a 3-year limited warranty from the production date printed on the product.
During this period, Proteco Srl offers a guarantee in case of malfunction due to construction, material or assembly
faults. Warranty terms are applicable just if the instructions and maintenance included in this manual are fully
respected and carried out.
Warranty is void when fake spares are used and doesn't respond for faults due to incorrect installation.
Installation and any maintenance works are responsibility of the person installing the system.
In no case and in no way will Proteco Srl be liable to the end user for damages, including any loss of profits, savings or
other accidental or indirect damages, resulting from the use or inability to use PROTECO products.
Any return without authorization number will be rejected.
The shipment of the returned product and the related costs are the end user/buyer charge.
All defective products must be returned together with the proof of payment to:
PROTECO Srl Via Neive 77, 12050 Castagnito (CN) - Italia
Warranty is void when:
-
The product has been treated / stored under abnormal conditions of use and maintenance.
-
The product has been repaired, modified or altered.
-
The product has been subject to misuse, neglect, electrical problems, improper package, accident, or natural events.
-
The product was installed improperly.
-
The product warranty label is illegible or is missing entirely.
-
The malfunction is due to improper installation or to natural and/or accidental causes (eg: falls, oxidation, overvoltage).
7
.
DISPOSAL
Any part of the system, including devices such as remote controls, must be disposed in compliance with current
legislation, as they may be harmfull for the environment.
Most of the materials used are similar to solid urban waste and can be handled accordingly.
They can be recycled through separate collection and disposed in authorized centers.
Other components (electronic boards, batteries, etc.) may instead contain polluting substances.
They must therefore be removed and delivered to companies authorized for their recovery and disposal.
Before proceeding, it is always advisable to check the specific regulations in force.
Disposal of packing
Packaging components (cardboard, plastics, etc.) are sare similar to solid urban waste and can be handled
accordingly without any difficulty, simply by carrying out separate collection for recycling. Before proceeding, it is
always advisable to check the specific regulations in force.
DO NOT POLLUTE THE ENVINRONMENT!
1
2
rev01_22
