MyFlyDream MFD AAT, Руководство пользователя

Страница: 15 / 32

After removing the left panel you will see there are 7 soldering pad on the PCB. They are
numbered from 1 to 7.
A 6 channels tracker has only a 6 pin plug. The Aux Channel 1 maps to PIN#3 of the
plug.
A 12 channels tracker has two plugs, one 6Pin, one 7Pin. The 6Pin plug is used to
connect to AATDriver. PIN#3 of the 6 pin plug is a null pin. The Aux Channel 1 to 7 map to
PIN#1 to PIN#7 of the 7pin plug.
CAUTION: The maximum current allowed for each channel is 2A. Don’t exceed this limit
or the slip ring will be damaged.

Setup and operation of the AATDriver
Common functions and operations of the AATDriver:
Function How to operate Remark
Toggle between MFD
mode and VGPS mode
Hold down
the HOME button to
power on
After powering on, the yellow LED or the
red LED of AATDriver will flash rapidly.
The flashing of the yellow LED indicates that
the current mode is VGPS mode, the flashing
red one indicates the MFD mode.
Power off and then power on again,
AATDriver will start working in the new
mode.
Every time you power on while pressing the
HOME button, AATDriver will toggle
between the two modes
Every time you power on without pressing