Description of the tracker LED indicators:
Indicator
Status
Meaning
Off-Line
(Red Light)
Off
The tracker is tracking.
On
The tracker is in off-line mode.
Flashing
The tracker stands by. If you have set home
position, the tracker will start to track once
the target moves 10 meters away.
North
(Yellow Light)
Flashing
The tracker is executing the North calibration.
CAL.
(Green Light)
On
The tracker is executing the hard
iron calibration.
How to use the auxiliary channels of the tracker
There is 1 auxiliary channel available in a 6-channel tracker and 7 auxiliary channels are
available in the 12-channel version. Users can use these auxiliary channels to transmit their
own signals. For example, you put a data radio on the tracker, so maybe you need to connect
the TX, RX, Power and GND from the data radio to your ground device. Use the auxiliary
channels so that you can transmit the data without obstructing the tracker to rotate
continuously.
To use these auxiliary channels you need to remove the left side panel. These pictures
show how to remove the panel step by step:
Содержание MFD AAT
