Installation Manual for F36 and F54 Ceiling Fans
5
ATTACHiNg THE FAN BLADES
1. Fasten the blade assembly to the motor housing (Figure 7) – 2 screws
on top and 2 on bottom of blade. Tighten firmly but be careful to not
over tighten.
iNSTALLiNg FAN TO THE ELECTRiCAL CiRCuiT
1. Pass the supply wires through the center hole in the ceiling mounting bracket.
2. Carefully lift the fan assembly up to the ceiling mounting bracket and seat the ball joint in the bracket. Make
sure the tab on the ceiling mounting bracket is properly seated in the groove in the hanger ball joint. (Figure 8).
Figure
7
Figure
8
WHen usIng tHe standard ball/Hanger MOuntIng, tHe tab In tHe rIng
at tHe bOttOM OF tHe Hanger bracket Must rest In tHe grOOVe OF tHe
Hanger ball. FaIlure tO PrOPerly seat tHe tab In tHe grOOVe cOuld
cause daMage tO WIrIng.
Downrod/Hanger
Ball Assembly
Hanger Bracket
Tab fits in groove
in ball joint
