Page
32
of
51
NOTICE
Make a note of the SSID and Password (P/W) now, for use
in the next steps.
NOTICE
If the step above is skipped, please see section 9.4 for details on retrospective WiFi set-up.
9.3
Installs outside of Great Britain
Before following the steps below, please ensure this
zappi
is not being installed in England, Scotland or Wales.
If being installed in any of these countries, Smart Regulations must apply and you will need to follow either
9.1or 9.2 for Set-up instructions.
Step 1:
Select “No” as Smart Regulations
don’t apply.
Step 2:
Select timezone relevant to installation location.
Step 3:
Review settings and press + to confirm.
Note:
Selecting “1
st
device installed” will configure your
zappi
as Master and enable vHub.
Selecting “Additional device” will configure
zappi
as
Slave and disable vHub.
Step 4:
If you are connecting to the
internet via WiFi please
skip ahead to
Step 6
If you inserted an Ethernet cable earlier
(section 8.4)
zappi
will detect this and
attempt connect to the home router
automatically.
Step 5:
Once
zappi
has secured an internet connection
via Ethernet the below screen will show.
Skip ahead to
Step 13
for next steps.
Step 6:
The following steps are for
zappi’s
connecting to the internet via WiFi. If you have already made
a hard wired Ethernet connection
jump ahead to
step 13.
zappi
will attempt to identify WiFi details. During this attempt you will see the first screen below. Once
established the second screen will show.
Содержание zappi
Страница 7: ...Page 7 of 51 ...
Страница 16: ...Page 16 of 51 ...
