Mycond DESS-80, Инструкция по эксплуатации, Страница: 5 / 8

www.mycond.co.uk
5
4. MAINTENANCE/SERVICE
ATTENTION
Always unplug the unit first before any maintenance, cleaning or work on the compressor.
1.
Remove the cover from the housing and blow it out with compressed air. Do not work with water!When
cleaning the outer panels with water, the entire panel must first of all be dried before switching the unit on.
2. Regularly check the cable fastening of the feed power outlets and the cable connectors. Cables and con-
nectors that are not okay must be replaced
3. Installation and repair work should only be carried out by a specialised workshop. If this work is per-
formed by third parties, then this voids the warranty and liability.
5. TECHNICAL SPECIFICATIONS
Type MYCOND DESS-80
Dehumidification capacity kg/h (at 26°/60% r.H.) 3.4
Electrical connection (V/Hz) 230 / 50Hz
Power consumption (kW) 1.4
Current consumption (A) 6
Fuse protection for in-house installation (A) 16
Length / width / height (mm) 395 / 335 / 410
Weight (kg) 20.8
Loudness level at max. speed (3m) dBA 46
Protection class (IP) IP 44
Humid volumetric flow rate (m 3 /h) 50
Air volumes of process air (m
3
/h) 330
Ambient temperatures (°C) -20~60
Diameter of dry air connection (front side) (mm) 125
Diameter of air inlet connection for process air 1 (back side) (mm) 125
Diameter of air inlet connection for process air 2 (back side) (mm) 80
Diameter of air outlet connection for humid air 1 (back side) (mm) 80
ATTENTION
The technical data can change during the course of ongoing development without prior announcement. Some of the
values are approximate values.