Page 5 , in 12 pages
2.8.3 Move the light spot by one spot overlapping the upper 1/3 part of the previous spot.
No emitting one area repeatedly, otherwise may cause inflaming or burns.
2.8.4 The handpiece should touch the skin vertically, no over pressing or leaving the skin.
2.8.5 Observing the reaction of skin while operating.
2.9 Cold compress
Keep gel coating for 20 minutes after operation ending; carry out cold compress in obvious
slight reddish reaction till reddish fading away.
2.10 Cleaning
Clean the gel with cold water, coat corresponding cosmetics.
2.11 Treatment Course
Skin Rejuvenation Program: 30-45 days/time
4 times/course
Hair Removal Program: 2-3months/time
3times/course
2.12
Special reminding
2.12.1 Ask the client before treatment: is there a allergic or not; is there a bad reaction before for
similar operation; fill the Client File concretely. Adjust the parameters on the basis of full
acquaintance of the condition of operatee. Inform the operatee the possible reation in
operation before operating.
2.12.2 In large area treatment or long time continuous operating, the water inside the equipment
will warm up and the handpiece will be hot, interrupt the operation to refresh the water or
leave the water cool down to continue operating.
2.12.3 Refresh the circulating water in one month; use purified water or medical distilled water.
Ⅲ.
Operation Instruction
3.1 Before starting the machine
3.1 Accessories connecting
：
3.1.1 Connect the handpieces, filters, and probes:
3.1.1.1. Put the handpiece on the hanger
3.1.1.2. Connect the handpiece:
Connect water pipes (2), signal wires (2, black-to-black, red-to-red), xenon lamp wire, and RF
wire to the corresponding jacks on the backboard tightly.
3.1.2 Check the water holes of the backboard, make sure the water outlet hole is plugged well.
