MyBinding Plockmatic BM 200, Руководство по установке, Страница: 50 / 53

1-45
Installation
31 January 2007
1.5.7 CHECK THE INSTALLATION
1. In the Trimmer, check the Index 16 value [A].
2. Power on the Booklet maker.
3. Press the Tools button on the Booklet Maker.
4. Scroll down to Service and press the OK button.
5. Key in the Password.
6. Scroll down to NVM Values and press the OK button.
7. Scroll to INDEX 16, FTR.Knife(Zero), and press the CHG button.
8. Key in the value found in the trimmer.
9. Go down to Store and press the OK button.
10. Remove the two Stapler heads, according to section (
3.4.12 ).
11. Perform a Detailed self-diagnostic, according to section (
5.3.3 ).
12. Reinstall the two Stapler heads, according to section (
3.4.12 ).
13. Power on the Collator.
14. Set up the Collator to send 2 sheets of A4/8.5 x 11” to the Booklet Maker.
15. Set up the Booklet maker to A4/8.5 x 11”.
16. Set up the Booklet maker to Staple ON.
17. Set up the Trimmer to Trimmer ON.
18. Set up the SquareFolder to AUTO.
19. Feed a 2 sheet A4/8.5 x 11” set to the Booklet maker system.
[A]
Trimmer interior towards Booklet Maker
SQUAREFOLDER INSTALLATION