MyBinding Plockmatic BM 200, Руководство по установке, Страница: 20 / 53

1-15
Installation
31 January 2007
1.3.6 CHECK THE INSTALLATION
1. If installing a Trimmer FTR 200, continue to section (
1.4 ) otherwise
continue with step 2.
2. Power on the Booklet maker and the Collator.
3. Remove the two Stapler heads, according to section (
3.4.12 ).
4. Perform a Detailed self-diagnostic, according to section (
5.3.3 )
5. Reinstall the two Stapler heads, according to section (
3.4.12 ).
6. Set up the Collator to send A4/8.5 x 11” sheets to the Booklet Maker.
7. Set up the Booklet maker to A4/8.5 x 11”.
8. Set up the Booklet maker to Staple ON.
9. Feed a A4/8.5 x 11” set to the Booklet maker.
10. Check for the correct feeding of the set from the Collator.
NOTE: If paper is not fed correctly, check adjustment of the Booklet maker
according to section (
1.3.3 ).
11. Set up the Collator to send A3/11 x 17” sheets to the Booklet Maker.
12. Set up the Booklet maker to A3/11 x 17”.
13. Set up the Booklet maker to Staple ON.
14. Feed a A3/11 x 17” set to the Booklet maker.
15. Check for the correct feeding of the set from the Collator.
NOTE: If paper is not fed correctly, check adjustment of the Booklet maker
according to section (
1.3.3 ).
BOOKLET MAKER INSTALLATION